Description
Earl’s factory assembled hose assemblies are made from the same SPEED-FLEX stainless steel braided hose(w/ .040″ thick PTFE lining), that has become the standard of the racing industry. These hose assemblies include crimped style hose ends and are ideal for use in most flexible brake, clutch and instrument hoses. Each hose is pressure tested to 4,000 PSI (recommended maximum operating pressure 2,000 PSI).
Resources
Installation Instructions
Specifications:
| Color | Cast Aluminum |
| Compatible Hose End | Swivel-Seal |
| Description_ASC | Holley Performance Emission Code 5: This part is legal for sale or use on Emissions Controlled Vehicles; Uncontrolled (Non-Emissions Controlled) Vehicles; and Racing Use Only Vehicles because it does not affect vehicle emissions and is not covered by emissions regulations |
| Description_DEF | Fuel Hose |
| Description_DES | Speed-Flex™ Hose |
| Description_EXT | Speed-Flex™ Hose; Pre-Made; Hose Size: -3AN; Fitting Size: -3AN Female Swivel Both Ends; Length: 156 in.; Stainless Steel Braid; PTFE Wall Thickness: .040 in.; |
| Description_FAB | -65 to +450 Degrees F Operating Temperature |
| Description_FAB | Impervious To Any Fuel Blend |
| Description_FAB | Improved Abrasion Resistance |
| Description_FAB | Increased Brake Pedal Firmness |
| Description_FAB | Modulate Brakes Efficiently |
| Description_FAB | Sold Per Foot (Bulk Only) |
| Description_FAB | Solves Pedal Travel Problem |
| Description_FAB | Stainless Steel Outer Braid |
| Description_FAB | Use Of Extruded Teflon™ Coating |
| Description_INV | -3 ST./ST. 156 Inch HOSE |
| Description_LAB | Proposition 65 |
| Description_MKT | Earl’s factory assembled hose assemblies are made from the same SPEED-FLEX stainless steel braided hose(w/ .040 in. thick PTFE lining), that has become the standard of the racing industry. These hose assemblies include crimped style hose ends and are ideal for use in most flexible brake, clutch and instrument hoses. Each hose is pressure tested to 4,000 PSI (recommended maximum operating pressure 2,000 PSI). |
| Description_MKT | Earl’s factory assembled hose assemblies are made from the same SPEED-FLEX stainless steel braided hose(w/ .040″ thick PTFE lining), that has become the standard of the racing industry. These hose assemblies include crimped style hose ends and are ideal for use in most flexible brake, clutch and instrument hoses. Each hose is pressure tested to 4,000 PSI (recommended maximum operating pressure 2,000 PSI). |
| Description_SHO | Hose |
| Fluid Type | Automatic Transmission Fluid |
| Fluid Type | Bio-Fuels |
| Fluid Type | Brake |
| Fluid Type | Coolant |
| Fluid Type | Diesel |
| Fluid Type | E85 |
| Fluid Type | Methanol/Alcohol |
| Fluid Type | Oil |
| Fluid Type | Pump Gas |
| Fluid Type | Race Gas |
| height | 3.25 |
| Hose Outer Material | Stainless Steel Braided |
| Hose Size | 3AN |
| Inside Diameter | 0.375 in. |
| length | 156.000 in. |
| length | 6.75 |
| LTL | N |
| Material | Stainless Steel |
| Outside Diameter | 0.375 in. |
| Product Length | OEM |
| Size | -3 AN |
| Submersible in Fuel | Yes |
| Wall Thickness | 0.430 in. |
| WARNING CA Proposition 65 | Yes |
| WARNING CA Proposition 65 Message | WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov |
| weight | 0.68 |
| width | 5.0 |
Explore more from our collection.
Reviews
There are no reviews yet.